Renault Can K-line Immo Tool V4.04

Renault Can K-line Immo Tool V4.04 - Programming Tool for Renault

The Renault Can K-line Immo Tool V4.04 is an advanced programming tool specifically designed for Renault vehicles. With its extensive support for CAN/K-line EEPROM read and write functionality, this tool offers a complete solution for modifying the internal memory of Renault's electronic control units (ECUs).

Main Features:

• Wide Compatibility: Works with a wide range of Renault ECU systems, including recent models.
• Ease of Use: No need to open the control unit or solder any components - all functions are performed via the OBDII connector.
• Immobilizer Code Clearing Function: Automatically clears the previously recorded immobilizer code to allow the use of a new ECU or data cloning.
• Versatile Software: Supports a variety of Renault ECU protocols and models for maximum flexibility.

Software Compatibility:

• EDC15C3 (both CAN-BUS and WIRE immobilizer systems) - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• EDC15C13 - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• SIRIUS 31H - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• SIRIUS 32[N] (both CAN-BUS and WIRE immobilizer systems) - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• SIRIUS 34 (both CAN-BUS and WIRE immobilizer systems) - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• SIRIUS 35 - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• EMS3132 (both CAN-BUS and WIRE immobilizer systems) - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• EMS3134 (both CAN-BUS and WIRE immobilizer systems) - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure (Immo code)
• SID301 - EEPROM Read/Write, FLASH Read/Write, Immobilizer Code Erasure, Impact Detection Erasure, Stored Mileage Read
• SIM32 - EEPROM Read/Write, FLASH Read/Write from HD64F7055, Immobilizer Code Erasure (Immo code)
• SAFIR / SAFIR2 / SFR200 (35/55 pin connector) - TMS374 EEPROM reading, Immobilizer code erasure (works without immobilizer code)
• IAW 6R.20 - TMS370 EEPROM Read/Write
• IAW 6R.30 - TMS370 EEPROM reading, Immobilizer code erasure (the vehicle operates without the immobilizer code)
• VALEO BII for ESPACE III - EEPROM Read/Write (9)08AZ60, Mileage Read/Write, Erase for Replacement, Transponder Data Read, Emergency Start
• VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Transponder Data Reading, Configuration, Reset to Factory Settings
• VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - PIN CODE Reading, Reset to Virgin State
• Instrument Cluster for Espace III (1998-2002) - Counter Reset, Remote RF Programming Erasure via the Instrument Cluster Connector
• SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - EEPROM 68HC05B16 Read/Write, Transponder Data Read
• Siemens UCH for Megane/Scenic I Ph2 ('99-'02) - EEPROM 705B32 Read/Write, Configuration Read/Write, Key Learning, Reset to Factory State
• UCBIC SIEMENS for MEGANE/SCENIC I Ph1 ('96-'98) - EEPROM 68HC05B16 Read/Write, Configuration Read/Write, Reset to Factory State
• LAGUNA II, ESPACE IV, VELSATIS Ph1/Ph2 - Programming the ignition card, changing the VIN. Resetting the UCH to a blank state, learning the UCH
• MEGANE II, SCENIC II Ph1/Ph2 - Card/UCH/ECM/ESCL Learning, VIN Change, UCH Reset to Virgin State
• Instrument Cluster for SCENIC II ('04-'08) - CAN-BUS activation for repair or mileage verification, language and unit change, VIN and mileage change, EEPROM read/write
• Instrument Cluster for Megane II ('03-'08) - CAN-BUS activation for repair or mileage verification, language and unit change, VIN change, mileage, EEPROM read/write
• CLIO II Ph1 - Key learning, configuration, BMT reset to blank state
• CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - EEPROM 93C66 Read/Write, Key Learning, VIN Change, UCH Reset to Virgin State, UCH Learning
• KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07-) - Key learning, VIN change, UCH reset to virgin state, Virgin UCH learning
• KANGOO II (2007-2012) - Key programming, VIN change, BCM reset to blank state, BCM blank learning
• MODUS / CLIO III ELECTRIC POWER STEERING (TRW DAE/PAS) - Immobilizer Code Clearing (Immo code), VIN Change via OBDII, DF002 Clearing from 24C16 Dump, CRC Repair (IMPROVED!)
• MEGANE/SCENIC III ELECTRIC POWER STEERING (NSK DAE/PAS) - Immobilizer Code Clearing (Immo code), VIN Change via OBDII
• TWINGO III ELECTRIC POWER STEERING (JTEKT DAE/PAS) - Immobilizer Code Clearing (Immo code), VIN Change via OBDII
• CLIO IV ELECTRIC POWER STEERING (JTEKT DAE/PAS) - Immobilizer Code Clearing (Immo code), VIN Change via OBDII
• LAGUNA III (2007-2015) - Ignition card programming, VIN change, BCM reset to virgin state
• LAGUNA III / LATITUDE (2007-2015) - BCM / ECM / ESCL learning in protected mode
• LATITUDE (2010+) - Ignition card programming, VIN change, BCM reset to virgin state
• CLIO III / MODUS - Key programming, VIN change, ECM learning in protected mode, BCM learning, BCM reset to virgin state
• CLIO III - Card/UCH/ECM/ESCL Learning, VIN Change, UCH Reset to Virgin State
• CLIO IV (2012+) - Card programming, VIN change, HFM reset to blank state, ECM/ESCL/HFM learning in protected mode
• MASTER III (2010-2014) - Key programming, VIN change, BCM reset to blank state, BCM blank learning
• TRAFIC II Ph3 (2010-2014) - Key programming, VIN change, BCM reset to blank state, BCM blank learning
• WIND (2010-2013) - Key programming, VIN change, ECM learning
• TWINGO II (2007-2013) - Key programming, VIN change, ECM learning
• TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL - Key programming, VIN change
• LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) - Key programming, VIN change
• LOGAN, SANDERO, DOKKER, SYMBOL, DUSTER (2012+) - Key/ECM/BCM Learning, Factory Reset, DataFlash Read, VIN Change
• MEGANE III / SCENIC III (2009-2015) - Card programming, VIN change, BCM reset to blank state
• MEGANE III / SCENIC III (2009-2015) - Classic key programming, VIN change, BCM reset to blank state
• MEGANE III / SCENIC III / FLUENCE (2009-2015) - BCM / ECM / ESCL learning in protected mode
• KOLEOS (2008+) - Ignition card programming, VIN change, BCM reset to blank state, ECM/BCM/ESCL learning
• EDC17 / MED17 EEPROM TRICORE CRC - EEPROM dump reset to blank state, CRC repair of blocks
• EDC16 EEPROM DUMP CRC - Resets the EEPROM dump to a blank state, repairs CRC errors in blocks
• DELPHI DCM 3.4 EEPROM DUMP CRC - Reset EEPROM dump to Virgin State, Change KM, Repair CRC Blocks (NEW!)
• SID305/306/307/308/309 TRICORE DFLASH DUMP CRC - KM reading/change, CRC repair of blocks
• MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) - CRASH DATA Erasure via OBDII / Direct Connection
• LAGUNA III AIRBAG (AUTOLIV RC5) - CRASH DATA Erasure via OBDII / Direct Connection
• TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) - CRASH DATA Erasure via OBDII / Direct Connection
• MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) - CRASH DATA Erasure via OBDII / Direct Connection
• AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) - CRASH DATA Erasing via OBDII / Direct Connection
• MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) - CRASH DATA Erasure via OBDII / Direct Connection
• CLIO II X65 AIRBAG (BOSCH AB8) - CRASH DATA Erasure, Read/Write of the MCU's internal EEPROM via OBDII / direct connection
• CLIO III Ph1 / MODUS Ph1 AIRBAG (BOSCH AB9.X) - Crash data clearing, error code clearing via OBDII / direct connection
• AIRBAG ESPACE III (SIEMENS) - CRASH DATA Erasure, Read/Write of the MCU's internal EEPROM via OBDII / direct connection
• LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) - CRASH DATA Erasure, EEPROM Reading via OBDII / Direct Connection
• KADJAR / TALISMAN AIRBAG (AUTOLIV AC7 with MCU XC2336) - CRASH DATA Erasure via OBDII / Direct Connection
• CLIO IV Ph2 / CAPTUR Ph2 AIRBAG (CONTINENTAL 985100475R with R7F7010133) - CRASH DATA Erasure via OBDII / Direct Connection

Package Contents:

• 1x Renault Can K-line Immo Tool V4.04 Diagnostic Head.
• 1x USB cable.

Important Note: This tool does not completely disable the immobilizer (immo code). It is designed to erase the previously stored immobilizer (immo code) to allow the use of a new ECU or data cloning.

With the Renault Can K-line Immo Tool V4.04, you can enjoy precise and reliable programming for your Renault vehicles, without needing any additional equipment or advanced technical knowledge. Choose simplicity and efficiency with this cutting-edge tool.