Function to be activated via VCDS - VAG-COM software
Option description:
Allows you to configure the door locking confirmation with beep (alarm).
Displaying the menu on the MMI
[46 – Central Conv] -> [Coding – 07] -> [Long Coding Assistant]
Octet 4:
Bit 6: Check
For locking
[46 – Central Conv] -> [Adaptation – 10] -> (2)-sounder_settings-beeptime_closing_central_locking
Set the value to "single_beep" (single beep)
Set the value to "double_beep" (double beep)
[46 – Central Conv] -> [Adaptation – 10] -> (3)-Turn Signal control-Confirmation flashing locking central locking; flashing cycles
Set the value to "1" (simple blink)
Set the value to "2" (double blink)
To unlock
[46 – Central Conv] -> [Adaptation – 10] -> (1)-central_locking_system-beep_at_opening
Set the value to "On"
[46 – Central Conv] -> [Adaptation – 10] -> (4)-sounder_settings-beeptime_opening_central_locking
Set the value to "no_beep" (no beep)
Set the value to "single_beep" (single beep)
Set the value to "double_beep" (double beep)
[46 – Central Conv] -> [Adaptation – 10] -> (3)-Turn Signal control-Confirmation flashing unlocking central locking; flashing cycles
Set the value to "0" (no blinking)
Set the value to "1" (simple blink)
Set the value to "2" (double blink)
